| ROBO
WHPP 455D Water-Cooled Push-Pull Welding Gun |
|
|
|
|
|
|
|
|
The
Robo WHPP Water-Cooled Torch consists of the Robo WHPP torch body
with standard motor and gearbox, feed roll, neck-change mechanism,
integrated wire cutter, cable assembly and central connector WZ-2.
The Neck style must be specified and necks ordered separately; at
least one spare neck should be purchased for use as back-up during
tip and nozzle replacement. A WH Neck Alignment and Test Jig is recommended
for checking the neck geometry and correcting the alignment as necessary
before reusing. |
|
|
 |
|
|
|
|
|
|
|
|
|
|
| Type: |
Water-cooled
neck-change body and cable assembly, airblast and central Connector
WZ-2 |
| Rating: |
450
Amp CO2 |
|
400
Amp Mixed Gases |
|
100%
Duty Cycle |
| Wire
Sizes: |
.030"-.062"
(0.8mm-1.6mm) |
| Motor: |
42
VDC, 0.8 Amp maximum |
| Gearbox: |
17.1:1 |
| Max.
Wire Feed |
65
ft./min |
|
|
|
When
ordering, please specify:
|
|
•Neck
bend angle
|
|
•Wire
Diameter
|
|
•Cable
assembly length
|
|
•With
or without airblast connection
|
|
•Pull
motor control box voltage
|
|
•Material
to be welded
|
|
|
|
|
|
|
|
|
|
|
Model ROBO WHPP 455D |
|
|
|
|
|
|
Length |
Body/Cable Assy |
|
4' |
961.9004 |
|
5' |
961.9005 |
|
6' |
961.9006 |
|
8' |
961.9008 |
|
12' |
961.9012 |
|
15' |
961.9015 |
25' |
961.9161 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
